- Product description
- Product Features
- Application Industry
- Product Case
-
- Commodity name: Cloud software TCP/IP Elevator Board
- Commodity ID: FD-FL20X4
20 FLOORS Web Elevator Multifloors Controller
20 FLOORS Web Elevator Multifloors Controller
Product Parameters:
User capacity: 50.000 RS485: 1200 Meters Logs capacity: 100.000 Operation Temperature: -20～65℃ Processor: 32-bit RAM Operation Humidity: 10%～90%,RH Floor contro: 20-80 Floors (Through RS485 extend 4pcs elevator controller to achieve up to 80 floors.) Max.Range For Wiegand Reader: 80 Meters WG Reader: 1 Reader Communication Mode: Wiegand 26/34 bit. (Support customizable) RS485: 1 Size: 224*125*30mm TCP/IP Interface: RJ45(WEB Server) Weight: 800g Power Requirement: DC12V,1A Installation Diagram:
TCP/IP elevator control boards provide advanced networked management for modern elevators, enabling remote monitoring, efficient operation, precise control, and enhanced safety. They support seamless communication between elevator components and building management systems
Frequently Asked Questions
电源适配器在使用过程中发出嗡嗡、吱吱等异常响声
内部元件松动，此时需要专业人员打开适配器外壳并检查内部元件的固定情况。
电源适配器在使用过程中变得过热
1.检查是否连接了过多的设备或设备功率过大，超过适配器的额定功率，可减少连接设备数量或更换更大功率的适配器。
2.清理适配器的散热系统，如散热片是否被灰尘堵塞，风扇是否正常运转
3.可能是适配器内部电路存在短路故障，需专业人员检查并修复。
设备连接电源适配器后，充电速度极慢或无法充电
1.检查适配器的输出电压和电流是否稳定，如不稳定可能是内部电路元件老化或性能下降，需送修或更换。
2.检查充电接口是否松动、接触不良，如有问题可重新插拔或清理接口处的金属触点。
3.可能是设备的电池管理系统出现故障，可尝试重启设备或连接其他正常电源适配器进行测试。
Recommend
Product Message
