FD-ACN4P 4 Door 2 ways WEB Server Access Controller
FD-ACN4P 4 Door 2 ways WEB Server Access Controller
FD-ACN4P 4 Door 2 ways WEB Server Access Controller
+
  • FD-ACN4P 4 Door 2 ways WEB Server Access Controller
  • FD-ACN4P 4 Door 2 ways WEB Server Access Controller
  • FD-ACN4P 4 Door 2 ways WEB Server Access Controller

FD-ACN4P 4 Door 2 ways WEB Server Access Controller
FD-ACN4P 4 Door 2 ways WEB Server Access Controller
FD-ACN4P 4 Door 2 ways WEB Server Access Controller
+
  • FD-ACN4P 4 Door 2 ways WEB Server Access Controller
  • FD-ACN4P 4 Door 2 ways WEB Server Access Controller
  • FD-ACN4P 4 Door 2 ways WEB Server Access Controller

FD-ACN4P 4 Door 2 ways WEB Server Access Controller

4 Door 2 ways WEB Server Access Controller
  • Product description
  • Product Features
  • Application Industry
  • Product Case
    • Commodity name: FD-ACN4P 4 Door 2 ways WEB Server Access Controller
    • Commodity ID: FD-ACN4P

    4 Door 2 ways WEB Server Access Controller

    4 Door 2 ways WEB Server Access Controller

    Product Parameters:

    User capacity 100.000  Interlock Support
    Logs capacity 100.000  Anti-Passback Support
    Processor 32-bit RAM RS485 expandable
    output event relay
    4  (Optional)
    Management door 4 Door
    WG Reader 8(4 in&4 out) Tamper switch 1 
    OSDP Reader 8(4in&4 out) Power Requirement DC 12V,2A
    Exit Button Connection 4  Power Consumption
    (Exclude external device)
    1A
    EM Lock Connection 4 
    Sensor Connection 4  Reader Communication
    Mode
    Wiegand 26/34 bit.../OSDP
    Fire alarm input 1 
    Event relay output 1  Power Supply Support charge for UPS
    TCP/IP Interface: RJ45 Product Size/Weight 353*278*115mm/3KG

    Installation Diagram:

Frequently Asked Questions

电源适配器在使用过程中发出嗡嗡、吱吱等异常响声

内部元件松动,此时需要专业人员打开适配器外壳并检查内部元件的固定情况。

电源适配器在使用过程中变得过热

1.检查是否连接了过多的设备或设备功率过大,超过适配器的额定功率,可减少连接设备数量或更换更大功率的适配器。

2.清理适配器的散热系统,如散热片是否被灰尘堵塞,风扇是否正常运转

3.可能是适配器内部电路存在短路故障,需专业人员检查并修复。

设备连接电源适配器后,充电速度极慢或无法充电

1.检查适配器的输出电压和电流是否稳定,如不稳定可能是内部电路元件老化或性能下降,需送修或更换。

2.检查充电接口是否松动、接触不良,如有问题可重新插拔或清理接口处的金属触点。

3.可能是设备的电池管理系统出现故障,可尝试重启设备或连接其他正常电源适配器进行测试。

Recommend

Product Message

Fill out the message form and leave your contact information. Our staff will contact you within 24 hours (weekdays)